> Products > Silicone Sealant > Acetic Silicone > High-temp 265℃ Silicone Sealant

High-temp 265℃ Silicone Sealant

HIGH-TEMP 265℃ SILICONE SEALANT is a high quality, ready to use one component acetic silicone sealant, which withstands very high temperatures: up to +265℃ during permanent work and for temporary contact. It has excellent adhesion to most building materials. It can be used as engine pad. Ideal repair of automobiles and motorcycles: sealing of engine and transmission components and accessories.

Send Inquiry

Product Description

1.PRODUCT FEATURE OF HIGH-TEMP 265℃ SILICONE SEALANT

●Use temperature range from -40℃ to +265℃
●Movable seams fit
●Excellent adhesion to glass, brick, metal, ceramic, enamel, impregnated or painted wood and laminate, etc.
●Sealing of engine and transmission components and accessories.

High-temp 265℃ Silicone Sealant

2.PRODUCT PARAMETER (SPECIFICATION) OF HIGH-TEMP 265℃ SILICONE SEALANT

Test Parameter	Unit	Result
As Supplied Tested at 23℃ and 50% RH
Specific Gravity	g/ml	0.98±0.02
Flow (sag or slump)	mm	0
Extrusion Rate	ml/minute	130
Skin Time	minute	5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤8
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A	Points	30
Movement Capability	%	±25
Tensile/Modulus at 50% Elongation	Mpa	0.32
Tensile/Modulus at 100% Elongation	Mpa	0.38
Ultimate Tensile Strength	Mpa	0.45
Ultimate Elongation at Break	%	300

3.APPLICATION OF HIGH-TEMP 265℃ SILICONE SEALANT

High-temp 265℃ Silicone Sealant

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

4.STORAGE AND SHELF LIFE OF HIGH-TEMP 265℃ SILICONE SEALANT

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

5.PACKING, SHIPPING AND SERVING OF HIGH-TEMP 265℃ SILICONE SEALANT

Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

High-temp 265℃ Silicone Sealant

6.FAQ

Q: What’s the reason that after used Neutral silicone sealant, there are some bubble on the surface?

A: When use the silicone sealant into the gap, the gap is damp, after the sunlight contact, it will make the steam effect the un-cured silicone sealant. That’s the reason why there are some bubble on the silicone surface.

Q: What’s the impact of silicone sealant with bubble?

A. No bubble on the silicone sealant surface is a common performance for a good quality PU foam; if the silicone sealant has bubble, the silicone rubber is easy to break after curing.

High-temp 265℃ Silicone Sealant

Hot Tags: High-temp 265℃ Silicone Sealant, Wholesale, Buy, Customized, China, Cheap, Good Quality, High Quality, Manufactures, Suppliers, Made in China, Factory, Price, Price List, Quotation, CE, Free Sample