Wooden and Doors PU Foam Gun Type A15 is an one-component, ready to use polyurethane foam. It is fitted with a plastic adapted head for use with a foam application gun. Wooden and Doors PU Foam A15 was special made for the wooden doors and windows frames with a good filling ability, also Wooden and Doors PU Foam A15 has high thermal and sound insulation performance.
●Perfect adhesion to a wide variety of surfaces such as UPVC, masonry, brick, block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon);
●Very good filling capacities;
●Application temperature is between + 5℃ to +35℃;
●Optimal application temperature is between +18℃ to +30℃;
●It contains CFC-free propellants which are harmless to the ozone layer.
Base | Polyurethane |
Consistency | Stable Foam |
Curing System | Moisture-cure |
Tack-Free Time (min) | 9~10 |
Drying Time | Dust-free after 14-16 min. |
Cutting Time (min) | 70~80 (+25℃) |
Yield (L) | 30-35 |
Shrink | None |
Cellular Structure | >84% close cells |
Specific Gravity (kg/m³) | 16 |
Temperature Resistance | -50℃~+80℃ |
Application Temperature Range | +18℃~+30℃ |
Colour | White |
Fire Class (DIN 4102 ) | B3 |
Insulation Factor (Mw/m.k) | 0.04 |
Compressive Strength (kPa) | 125 |
Tensile Strength (kPa) | 160 |
Adhesive Strength(kPa) | 110 |
Water Absorption (ML) | 2~3(no epidermis) |
<0.5(with epidermis) |
●Installing, fixing and insulating of door and window frames;
●Filling and sealing of gaps, joint and openings;
●Connecting of insulation materials and roof construction;
●Bonding and mounting;
●Insulating the electrical outlets and water pipes;
●Heat preservation, cold and sound insulation;
●Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure.
12 months in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.
Packing: 750ml 500ml 300ml, 12 cans/carton. (For special specifications, please contact us.)
Shipping: Sea or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
A: Normally it will turn yellow when the cured foam exposed to ultraviolet rays for a long time.
Q: How to clean the spray foam gun?A: Please use GNS Foam cleaner to remove the fresh foam.