SUPER NAILS ADHESIVE 711 is a premium grade multipurpose construction adhesive that delivers a consistently stronger and lasting bond on most construction substrate. This adhesive is a very versatile product which exhibits excellent water resistance, flexibility, good temperature and good slump resistance.
●One Part, easy to use, multipurpose;
●Paintable;
●Good adhesion for most common building materials wood, particle board, building board, masonry, aluminum, galvanized iron, steel, concrete, marble and granite (not be used for plastics or related substrate);
●Very good water and weathering resistance, durability and adhesive properties;
●Being suitable for interior & exterior general construction work.
Test Parameter | Unit | Result |
As Supplied Tested at 23℃ and 50% RH | ||
Specific Gravity | g/ml | 1.4±0.1 |
Flow (sag or slump) | mm | 0.5 |
Extrusion Rate | ml/minute | 280 |
Skin Time | minute | 5 |
non-volatile matter content | % | 73.6 |
Appearance | Exquisite and uniform, no obvious particles | |
Durometer Hardness, Shore A | Points | 85 |
Shear Strength (0.5h) | Mpa | 1.6 |
Shear Strength (72h) | Mpa | 38 |
Heat resistance (100℃ 30min) | Bring to room temperature, no bubble, no cracks |
*Sheet flooring to joists
*Metal or aluminium door strips to floors or walls
*Timber or fibre cement sheeting to cement block or brick walls
*Masonite /hardboard to timber or floor boards
*Wallboard or panelling to wood or metal frames
*Cork tiles to timber,fibre cement or plaster
--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.
12 months from manufacturing date when store in cool dry locations below 25℃. Keep away from heat source and direct sunlight during storage.
Packing : 300ml cartridge, 24ctgs/ctn
Shipping: Sea or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
Q: How long can I get a quote?
The quotation can be provided not longer than 24 hours on condition that we know all detailed requirements.
Q: How to find the suitable sealants?A: Please let me know your application purpose, substrate, application method and all your requirements.